Function |
Preset Counter |
Preset stages |
1stages |
Rated supply voltage |
100 to 240 VAC 50/60 Hz |
Operating voltage range |
85% to 110% of the rated power supply voltage |
Power consumption |
Approx. 12 VA (at 100 VAC) |
Counter (Count range) |
0~9999 |
Counter (Max. counting speed) |
5 kHz (Minimum counting input signal width: 0.1 ms (ON/OFF ratio: 1:1)) |
Counter (Input mode) |
Increment |
Counter (Output modes) |
N |
Counter (Reset system) |
External, manual and power reset |
Input signal |
Count / Reset / CP1 / CP2 |
Input method |
No-voltage input |
No-voltage input (No-contact input) |
Short-circuit (ON) impedance: 1 kΩ
Residual voltage: 2 V max.
Open circuit impedance: 100 kΩ |
No-voltage input (Contact input) |
Use a contact which can adequately switch 0.5 mA at 5 V. |
Minimum input signal width |
External reset: 20 ms
Manual reset: 20 ms
Power reset: 500 ms |
Control output (Contact output) |
- |
Control output (Solid-state output) |
Output type: Transistor output (NPN open collector)
Switching capacity: 30 VDC max., 100 mA max. |
Display method |
7-segment LED |
Digits |
4digits |
Character height |
Count value: 10 mm (Red)
Zero suppression: Not provided |
Prescaling function |
Not provided |
Key protection |
Not provided |
Teaching function |
Not provided |
Batch counting function |
Not provided |
Communications |
Not provided |
Memory backup |
Not provided () |
Surrounding air temperature |
Operating: -10 to 55 ℃
Storage: -25 to 65 ℃ |
Ambient humidity |
Operating: 35 to 85%
Storage: 35 to 85% |
Insulation resistance |
100 MΩ min. (at 500 VDC)
Between current carrying terminals and exposed non-current carrying metal parts / Between control output terminals and operating circuit |
Dielectric withstand voltage |
Between current carrying terminals and exposed non-current carrying metal parts:2000 VAC 50/60 Hz for 1 min
Between control output terminals and operating circuit:2000 VAC 50/60 Hz for 1 min |
Impulse withstand voltage |
Between power terminals:6.0 kV
Between current carrying terminals and exposed non-current carrying metal parts:6.0 kV |
Noise immunity |
Between power terminals:±2k V
Between input terminals:±500 V
Square-wave noise by noise simulator (Pulse width: 100 ns/1 µs, 1-ns rise) |
Static immunity |
±8 kV (malfunction) |
Vibration resistance (Destruction) |
10 to 55 Hz, 0.75-mm single amplitude each in 3 directions for 2 h |
Vibration resistance (Malfunction) |
10 to 55 Hz, 0.5-mm single amplitude each in 3 directions for 10 min |
Shock resistance (Destruction) |
300 m/s**2, 3 times each in 6 directions (3 axes) |
Shock resistance (Malfunction) |
100 m/s**2, 3 times in each directions (3 axes) |
Degree of protection |
Case front: IP40
Case rear: IP40
Terminal block: IP00 |
Mounting method |
Flush mounting/Surface mounting |
External connection method |
8-pinSocket |
Case color |
Light gray (Munsell 5Y7/1) |
Weight |
Approx. 110 g
|